Silīcija nitrīda keramikas pārskats

Silīcija nitrīda keramika ir augstas veiktspējas materiāli, kas pazīstami ar izcilām mehāniskajām īpašībām, tostarp izturību, stingrību un izturību pret nodilumu, koroziju un termisko triecienu, padarot tos ideāli piemērotus prasīgiem lietojumiem dažādās nozarēs.

Silīcija nitrīda keramikas īpašības

Izcila cietība un nodilumizturība.

Izcila mehāniskā izturība un izturība pret lūzumiem.

Lieliska termiskā stabilitāte un izturība pret termisko triecienu.

Augsta izturība pret koroziju agresīvā vidē.

Zems blīvums, kas veicina vieglas sastāvdaļas.

(6207/HC5C3 Hybrid Ceramic Ball Bearing Silicon Nitride Si3N4 Grove Ball Bearing Structure for Skateboard Industries)

Specifications of 6207/HC5C3 Hybrid Ceramic Ball Bearing Silicon Nitride Si3N4 Grove Ball Bearing Structure for Skateboard Industries

The 6207/HC5C3 Hybrid Ceramic Sphere Bearing combines sophisticated design with sensible layout for skateboard applications. This bearing makes use of a hybrid structure with silicon nitride (Si3N4) ceramic balls and a steel outer ring plus inner ring. The ceramic balls are lighter than standard steel balls. This decreases rubbing throughout high-speed turning. The grove round bearing layout guarantees even pack circulation. It enhances stability for skateboard wheels.

The inner and external rings are made from high-carbon chromium steel. This product withstands wear under hefty loads. The rings undergo warmth therapy. This raises hardness and durability. The ceramic balls are non-corrosive. They carry out well in wet or dusty settings. Skateboard bearings often deal with wetness and dust. This design minimizes damage from these variables.

Requirements consist of a 35mm external diameter, 17mm internal size, and 14mm width. The vibrant lots ranking is 19.5 kN. The static load ranking is 10.5 kN. These numbers show the bearing takes care of extreme pressure throughout sharp turns or jumps. The maximum operating speed gets to 18,000 rpm. This suits high-performance skateboarding.

Silicon nitride ceramic rounds have a smooth surface area. They reduced warmth generation during use. Much less warm indicates longer lubrication life. The hybrid setup cuts upkeep needs. Individuals change grease much less usually. The steel rings provide structural stamina. The ceramic spheres reduce overall weight. Lighter bearings assist skateboards increase much faster.

This bearing works with basic skateboard wheels. Setup matches typical bearings. No special tools are needed. The layout prevents premature failing from effect shocks. Skateboard touchdowns develop abrupt pressure. The bearing absorbs this without cracking.

Hybrid ceramic bearings last longer than all-steel variations. They withstand contortion under repetitive stress and anxiety. Skateboarders experience smoother rides. Rolling resistance decreases. Rate enhances with much less effort. The 6207/HC5C3 design satisfies industry needs for reliability. It fits street skating, vert ramps, and longboarding.

Lubrication utilizes top quality grease. It stays reliable in temperatures from -30 ° C to 120 ° C. The bearing operates silently. Noise reduction issues for metropolitan skate boarding. Normal cleansing keeps performance regular. Dirt accumulation is less likely as a result of ceramic’s non-porous surface.

(6207/HC5C3 Hybrid Ceramic Ball Bearing Silicon Nitride Si3N4 Grove Ball Bearing Structure for Skateboard Industries)

Applications of 6207/HC5C3 Hybrid Ceramic Ball Bearing Silicon Nitride Si3N4 Grove Ball Bearing Structure for Skateboard Industries

The 6207/HC5C3 hybrid ceramic ball bearing with silicon nitride (Si3N4) grove sphere birthing framework is made for skateboard applications. This product integrates ceramic rounds and steel races to boost efficiency. Skateboard bearings deal with high anxiety, rate, and environmental challenges. Crossbreed ceramic bearings resolve these issues much better than traditional steel bearings.

Silicon nitride ceramic rounds are lighter and more difficult than steel. This reduces friction throughout turning. Much less rubbing indicates skateboards roll quicker and longer with less effort. The grove round bearing structure sustains smooth movement under heavy loads. Skateboarders doing tricks or high-speed downhill runs take advantage of this style. The bearings handle abrupt impacts without losing efficiency.

Longevity is a key benefit. Ceramic stands up to use much better than steel. Skateboards utilized in wet or dusty conditions need bearings that last. The 6207/HC5C3 resists corrosion and debris buildup. Maintenance ends up being less complex. Customers cleanse them less commonly contrasted to conventional bearings. This saves time and expands the bearing’s life.

Heat administration is another benefit. Ceramic spheres generate much less warm at broadband. Overheating reasons traditional bearings to fail much faster. Hybrid bearings remain cooler throughout intense use. Affordable skateboarders and long-distance cyclists notice enhanced integrity.

Weight reduction matters in skateboarding. Lighter bearings make the board easier to regulate. Techniques like ollies or flips call for fast movements. The hybrid style cuts weight without giving up toughness. Skateboard makers prioritize this balance.

Cost-effectiveness includes value. Hybrid ceramic bearings cost more ahead of time yet last longer. Replacing steel bearings often adds costs with time. The 6207/HC5C3 provides long-term cost savings. Skate stores and serious bikers see it as a wise financial investment.

Compatibility with existing skateboard configurations is simple. The bearing fits basic wheel dimensions. Customers upgrade without customizing their tools. Installation complies with the exact same steps as traditional bearings. This benefit interest both beginners and professionals.

Efficiency in extreme problems stands out. Ceramic deals with temperature level adjustments much better than steel. Skateboards used in warm sidewalks or rainy weather condition execute continually. Bikers stay clear of sudden bearing failings throughout defining moments.

The 6207/HC5C3 crossbreed ceramic sphere bearing satisfies the demands of contemporary skate boarding. It improves speed, durability, and control across various riding styles. Individuals focus on their skills instead of devices restrictions.

Uzņēmuma Ievads

Advanced Ceramics, kas dibināts 17. gada 2014. oktobrī, ir augsto tehnoloģiju uzņēmums, kas nodarbojas ar keramikas materiālu un izstrādājumu izpēti un izstrādi, ražošanu, apstrādi, pārdošanu un tehniskajiem pakalpojumiem. Kopš dibināšanas 2014. gadā uzņēmums ir apņēmies nodrošināt klientiem vislabākos produktus un pakalpojumus, un ir kļuvis par nozares līderi, izmantojot nepārtrauktas tehnoloģiskās inovācijas un stingru kvalitātes vadību.

Mūsu produkti ietver, bet ne tikai, silīcija karbīda keramikas izstrādājumus, bora karbīda keramikas izstrādājumus, bora nitrīda keramikas izstrādājumus, silīcija karbīda keramikas izstrādājumus, silīcija nitrīda keramikas izstrādājumus, cirkonija dioksīda keramikas izstrādājumus, kvarca izstrādājumus utt. Lūdzu, sazinieties ar mums.(nanot)run@yahoo.com)

Apmaksas Iespējas

T / T, Western Union, Paypal, kredītkarte utt.

Sūtīšanas metodes

Pa gaisu, pa jūru, ar ekspress, pēc klientu pieprasījuma.

5 FAQs of 6207/HC5C3 Hybrid Ceramic Ball Bearing Silicon Nitride Si3N4 Grove Ball Bearing Structure for Skateboard Industries

What makes the 6207/HC5C3 hybrid ceramic ball bearing good for skateboards? The hybrid design uses silicon nitride balls and steel races. This mix makes the bearing strong. It handles high speeds and heavy loads common in skateboarding. Ceramic balls are lighter than steel. This reduces friction. Skateboards roll smoother and faster. The structure resists wear. It lasts longer even with rough use.

Why use silicon nitride (Si3N4) in these bearings? Silicon nitride is harder than steel. It doesn’t rust. Skateboards often face water or dirt. Ceramic stays stable in wet conditions. The material is lighter. This lowers the bearing’s weight. Less weight means easier spins. It also handles heat better. This prevents damage during fast riding.

How does this bearing handle impacts during skateboarding? The hybrid design absorbs shocks. Ceramic balls are stiff. They don’t deform under pressure. The steel outer race adds toughness. Together, they survive drops and rough landings. The bearing stays smooth. It won’t crack easily like all-ceramic options.

Does the 6207/HC5C3 need special maintenance? No. It works with standard skateboard care. Clean it regularly to remove dirt. Silicon nitride resists corrosion. Lubricate occasionally for peak performance. The bearing stays quiet. It doesn’t need frequent replacements.

Is the hybrid bearing worth the cost compared to all-steel versions? Yes. The upfront price is higher. The hybrid lasts longer. It saves money over time. Skateboarders get faster rolls and fewer replacements. Performance stays consistent. It’s a smart upgrade for serious riders.

(6207/HC5C3 Hybrid Ceramic Ball Bearing Silicon Nitride Si3N4 Grove Ball Bearing Structure for Skateboard Industries)