Introduction to 50mm 2″ Tr/Ts Aluminum Oxide Ceramic Zirconia Alumina Silicon Carbide Quick Change Discs for Cleaning Polishing Surface Condition

Alumina ceramics are known for their high hardness, wear resistance, corrosion resistance, good electrical insulation and high temperature stability. According to the different alumina content, it can be divided into different grades, such as 95 porcelain, 99 porcelain, etc., among which 99 porcelain refers to ceramic materials with an alumina content of 99%. As the alumina content increases, its mechanical strength and electrical insulation properties will also increase accordingly.

Characteristics of 50mm 2″ Tr/Ts Aluminum Oxide Ceramic Zirconia Alumina Silicon Carbide Quick Change Discs for Cleaning Polishing Surface Condition

High Hardness: Alumina ceramics have extremely high hardness, which makes it very wear-resistant and suitable for manufacturing abrasive tools and parts that require wear resistance.

Wear resistance: Due to its high hardness, alumina ceramics show excellent wear resistance and are suitable for manufacturing parts for long-term use.

Corrosion resistance: Alumina ceramics have good resistance to most acids and alkalis, making them widely used in the chemical industry.

Good electrical insulation: As an excellent electrical insulating material, alumina ceramics are widely used in electronic and electrical products.

High temperature stability: Ability to withstand extremely high temperatures without significant physical or chemical changes, which makes it an ideal choice for applications in high temperature environments.

Biocompatibility: In the medical field, certain grades of alumina ceramics are used to make medical devices such as artificial joints due to their good biocompatibility.

(50mm 2″ Tr/Ts Aluminum Oxide Ceramic Zirconia Alumina Silicon Carbide Quick Change Discs for Cleaning Polishing Surface Condition)

Specifications of 50mm 2″ Tr/Ts Aluminum Oxide Ceramic Zirconia Alumina Silicon Carbide Quick Change Discs for Cleaning Polishing Surface Condition

These 50mm (2 inch) fast modification discs are developed challenging. They handle major surface work. They attach fast to backing pads. You conserve time exchanging discs. No devices are required. Just press and twist.

Numerous strong materials are offered. Aluminum Oxide discs are general objective. They function well on steel, wood, compounds. Zirconia Alumina discs cut much faster. They last longer also. Perfect for laborious on steel. Ceramic discs are very tough. They grind boldy. They remain sharp under pressure. Silicon Carbide discs take on difficult materials. Think rock, glass, fiberglass. They cut cleanly.

The discs are flexible. Utilize them for grinding, cleansing, deburring, polishing. Remove rust, paint, weld splatter. Smooth rough sides. Tidy surface areas prior to paint. Mix welds. They fit angle grinders. They service die mills. The 7/8 inch arbor hole is basic.

The hook-and-loop support holds strong. Resonance stays reduced during usage. Your hands really feel much less weary. Job is a lot more comfortable. The discs stay level. They cut uniformly. You obtain a constant scratch pattern. They withstand packing. Product does not block the surface. Efficiency remains high.

Pick the right grit. Rugged grits (24, 36, 40, 60) remove product fast. Tool grits (80, 120) smooth surfaces. Great grits (180, 220) get ready for ending up. Suit the grit to your job. These discs change flap discs in some cases. They are typically more cost-effective.

Always use shatterproof glass. Use a face guard for hefty grinding. Use handwear covers. Ensure your tool is secure. Check disc condition before starting. Dispose of harmed discs. Job securely. These discs get the job done efficiently. They are trustworthy for experts and DIY customers. Stock up for your workshop.

(50mm 2″ Tr/Ts Aluminum Oxide Ceramic Zirconia Alumina Silicon Carbide Quick Change Discs for Cleaning Polishing Surface Condition)

Applications of 50mm 2″ Tr/Ts Aluminum Oxide Ceramic Zirconia Alumina Silicon Carbide Quick Change Discs for Cleaning Polishing Surface Condition

Operators use these 50mm 2″ quick-change discs regularly. They affix fast to backing pads. This conserves valuable work time. These discs are tough. They are made from products like aluminum oxide, zirconia alumina, and silicon carbide. This makes them last a long period of time. They deal with difficult tasks well.

Employees depend on them for aggressive cleansing jobs. They get rid of rust, paint, and range from steel surfaces quickly. They remove old coatings successfully. The discs prepare surfaces for brand-new paint or welding. They create the ideal profile for adhesion. This action is essential for high quality outcomes.

Polishing is another vital usage. The finer grit discs smooth surfaces. They refine the coating after rough grinding. They mix weld joints efficiently. They get rid of small scratches and flaws. This leaves steel looking clean and consistent. Different grits provide control over the coating.

Surface conditioning is essential. These discs level irregular locations. They ravel rough spots. They cleanse mill range off brand-new steel. They prep surfaces prior to applying therapies. Consistent surface area prep makes certain coverings stick appropriately. It prevents very early failing.

The quick-change function matters a great deal. Transforming discs takes secs. There’s no downtime adjusting nuts or adapters. Operators stay effective. The TR/TS opening system is standard. It fits most common mills and sanders. Compatibility is wide.

These discs deal with numerous materials. They reduced steel, stainless-steel, light weight aluminum, and various other steels. They are flexible workshop devices. Their toughness saves money. They do not wear quick. You get more work done per disc. They manage demanding tasks accurately.

Company Introduction

Advanced Ceramics founded on October 17, 2014, is a high-tech enterprise committed to the research and development, production, processing, sales and technical services of ceramic relative materials and products.. Since its establishment in 2014, the company has been committed to providing customers with the best products and services, and has become a leader in the industry through continuous technological innovation and strict quality management.

Our products includes but not limited to Silicon carbide ceramic products, Boron Carbide Ceramic Products, Boron Nitride Ceramic Products, Silicon Carbide Ceramic Products, Silicon Nitride Ceramic Products, Zirconium Dioxide Ceramic Products, Quartz Products, etc. Please feel free to contact us.

Payment Methods

T/T, Western Union, Paypal, Credit Card etc.

Shipment Methods

By air, by sea, by express, as customers request.

5 FAQs of 50mm 2″ Tr/Ts Aluminum Oxide Ceramic Zirconia Alumina Silicon Carbide Quick Change Discs for Cleaning Polishing Surface Condition

Here are 5 FAQs about 50mm quick change discs:

What are these discs for?
These 50mm quick change discs clean surfaces. They polish metal. They prepare surfaces for paint or coating. They remove rust, paint, and old material. They work on steel, wood, concrete. They fit many common tools.

Why choose these specific discs?
These discs use strong ceramic grains. Aluminum oxide, zirconia alumina, silicon carbide options exist. Each grain tackles different jobs. Aluminum oxide is good all-around. Zirconia alumina cuts faster. Silicon carbide works best on harder stuff like stone. The ceramic grains last a long time. They cut well without wearing out fast.

What makes them “quick change”?
These discs attach easily. They use a hook-and-loop backing system. The disc has loops. The backing pad on your tool has hooks. Press the disc onto the pad. It sticks firmly. Pull it off when you need a new one. It takes seconds. No tools are needed for changing discs. This saves time.

How do I use them safely?
Always wear safety glasses. Wear gloves. Wear a dust mask. These discs create dust. Hold the tool firmly. Let the disc do the work. Don’t push down too hard. Pushing too hard wears the disc faster. It might break the disc. Keep the disc flat on the work surface. Avoid tilting it too much. Check the disc for damage before use. Replace damaged discs immediately.

Which disc type is best for my job?
Pick the grain based on your material. Use aluminum oxide for general steel cleaning. Use zirconia alumina for faster cutting on tough steel. Use silicon carbide for non-ferrous metals, stone, or fiberglass. Consider the surface finish you want. Coarser grains remove material faster but leave a rougher finish. Finer grains create a smoother finish. Start with a coarser disc for heavy removal. Switch to a finer disc for smoothing. Match the disc to your task.

(50mm 2″ Tr/Ts Aluminum Oxide Ceramic Zirconia Alumina Silicon Carbide Quick Change Discs for Cleaning Polishing Surface Condition)