Overview of Silicon Carbide Ceramics

Silicon Carbide (SiC) ceramics are renowned for their outstanding mechanical properties, including high hardness, strength at elevated temperatures, and excellent thermal shock resistance. These materials are pivotal in cutting-edge industrial applications, from abrasives to aerospace components, due to their unique combination of properties.

Features of Silicon Carbide Ceramics

High Hardness: Exceptional wear resistance.

Thermal Shock Resistance: Can withstand rapid temperature changes.

Chemical Stability: Resistant to most chemicals.

High Thermal Conductivity: Efficient heat dissipation.

Low Density: Lightweight for its strength.

(Tactical Vest Aluminum/Silicon Carbide Plate Hard Armor IIIA/III/IV Ceramic Personal Defense Strike Face Hard Tactical Plate)

Specification of Tactical Vest Aluminum/Silicon Carbide Plate Hard Armor IIIA/III/IV Ceramic Personal Defense Strike Face Hard Tactical Plate

The Tactical Vest Aluminum/Silicon Carbide Plate Hard Shield combines sophisticated materials for top-level security. It uses a ceramic strike face constructed from silicon carbide. This layer shatters incoming projectiles on effect. The back layer is light weight aluminum for architectural assistance. The layout quits hazards up to NIJ Degree IIIA, III, and IV. Level IIIA withstands hand gun rounds like.44 Magnum. Level III obstructs rifle rounds like 7.62 mm FMJ. Degree IV defeats armor-piercing rounds like.30-06 M2 AP. Home plate is lightweight for a tough shield option. It balances weight without compromising safety and security. The complete thickness stays low for wheelchair. The sides are bevelled to fit common plate carriers. It deals with a lot of tactical vests. The materials stop spalling. This decreases injury from bullet fragments. The plate deals with several hits. It keeps honesty after repeated impacts. Examining fulfills strict NIJ requirements. It carries out in severe problems. Home plate stands up to water, warmth, and deterioration. It remains functional in rough environments. The strike face is bonded to a polyethylene support. This takes in energy and decreases backface deformation. The building and construction reduces blunt pressure trauma. The plate is compatible with front and back panels. It pairs with soft armor for extra insurance coverage. Adjustable bands secure it in place. The surface area is smooth to prevent equipment getting. It fits low-profile or overt providers. The design focuses on individual comfort. The weight circulation minimizes tiredness during long goals. Home plate is accredited for armed forces and police use. Civilians can use it for personal defense. It matches energetic shooter scenarios or high-risk occupations. Maintenance is simple. Clean the surface area clean after use. Store in a completely dry, amazing location. Stay clear of going down or striking the edges. Evaluate regularly for cracks or damages. Replace if structural flaws appear. Home plate has a long life span with appropriate care. It uses reputable protection without complex upkeep. Custom sizing is readily available for specialized requirements. Colors match conventional tactical gear. The profile remains slim under clothes. It incorporates with existing load-bearing systems. The balance of weight and defense makes it a functional selection. The modern technology focuses on real-world performance. It fulfills the needs of modern-day fight and emergency feedback.

(Tactical Vest Aluminum/Silicon Carbide Plate Hard Armor IIIA/III/IV Ceramic Personal Defense Strike Face Hard Tactical Plate)

Applications of Tactical Vest Aluminum/Silicon Carbide Plate Hard Armor IIIA/III/IV Ceramic Personal Defense Strike Face Hard Tactical Plate

The Tactical Vest Aluminum/Silicon Carbide Plate Hard Armor IIIA/III/IV Porcelain Personal Defense Strike Face Hard Tactical Plate is developed for risky circumstances needing trusted protection. This shield integrates light weight aluminum and silicon carbide ceramics to produce a light-weight yet long lasting strike face capable of quiting bullets approximately NIJ Degree IV risks. Army workers, police officers, and safety operatives utilize this plate to defend against rifle rounds, pistol fire, and fragmentation.

The ceramic layer shatters inbound projectiles on influence, dispersing energy across the plate. The light weight aluminum support includes structural support, avoiding fractures from dispersing. This style ensures multi-hit resistance without jeopardizing flexibility. Evaluating much less than typical steel plates, it minimizes tiredness throughout extended goals. Home plate fits conventional plate providers, making it compatible with the majority of tactical equipment configurations.

Risk insurance coverage consists of Level IIIA (high-velocity handguns), Degree III (rifle rounds like 7.62 mm NATO), and Degree IV (armor-piercing ammunition). Its slim profile allows discreet wear under clothing or assimilation into overt fight vests. The strike face withstands environmental elements like dampness, warmth, and abrasion, keeping efficiency in harsh problems.

Emergency responders and personal safety teams deploy this armor for riot control, hostage rescue, and close-quarters operations. Private citizens in high-risk careers or regions with raised risks also use it for individual defense. The plate’s modular design sustains including injury pads or soft armor backers for boosted blunt pressure protection.

Strenuous testing guarantees compliance with NIJ criteria. Each plate goes through ballistic trials to confirm consistency against specified risks. The non-metallic ceramic make-up lessens radar and thermal trademarks, helping stealth throughout tactical maneuvers.

This armor suits dynamic scenarios where weight and flexibility effect mission success. Its strike face innovation prioritizes quiting power without giving up wearer dexterity. Modular accessory systems allow quick swaps in between danger levels, adapting to developing functional requirements.

Sturdiness meets practicality in this service. The aluminum-silicon carbide blend resists contorting under anxiety, prolonging life span. Customers maintain full series of motion while taking advantage of military-grade defense. Area reports validate reliability in battle zone, city interactions, and protective detail projects.

Home plate’s heat-resistant buildings protect against destruction in severe temperature levels. Its low maintenance demands make it suitable for extended releases. This shield stands for an equilibrium of sophisticated materials design and real-world functionality, supplying vital security when risks escalate.

Company Introduction

Advanced Ceramics founded on October 17, 2014, is a high-tech enterprise committed to the research and development, production, processing, sales and technical services of ceramic relative materials and products.. Since its establishment in 2014, the company has been committed to providing customers with the best products and services, and has become a leader in the industry through continuous technological innovation and strict quality management.

Our products includes but not limited to Silicon carbide ceramic products, Boron Carbide Ceramic Products, Boron Nitride Ceramic Products, Silicon Carbide Ceramic Products, Silicon Nitride Ceramic Products, Zirconium Dioxide Ceramic Products, Quartz Products, etc. Please feel free to contact us.(nanotrun@yahoo.com)

Payment Methods

T/T, Western Union, Paypal, Credit Card etc.

Shipment Methods

By air, by sea, by express, as customers request.

5 FAQs of Tactical Vest Aluminum/Silicon Carbide Plate Hard Armor IIIA/III/IV Ceramic Personal Defense Strike Face Hard Tactical Plate

What is a Tactical Vest Aluminum/Silicon Carbide Plate Hard Armor? This plate is a protective insert for tactical vests. It uses aluminum and silicon carbide ceramics. These materials stop bullets and fragments. The strike face—the front layer—absorbs impact. The back layer holds the structure. It meets IIIA, III, and IV protection standards. This makes it versatile for different threats.

What threats does this armor stop? Level IIIA stops handgun rounds like .44 Magnum. Level III resists rifles like 7.62mm FMJ. Level IV blocks armor-piercing rounds like .30-06 M2AP. It also protects against shrapnel. The ceramic design breaks bullets on impact. This spreads the force. The plate stays intact. It keeps the wearer safe in high-risk situations.

Why choose aluminum/silicon carbide over steel? Steel plates are heavier. Aluminum and silicon carbide are lighter. This reduces fatigue during long use. The ceramic layer is harder than steel. It shatters bullets faster. The combo keeps weight low without losing strength. Carrying this plate feels less bulky. Movement stays easier in critical moments.

How long does the plate last? It lasts for years with proper care. Avoid dropping it. Store it dry. Check for cracks often. Replace it if damage appears. Ceramic can chip if hit hard. Minor surface scratches are fine. Follow the maker’s guidelines. Regular inspections ensure reliability. This plate is a long-term defense solution.

Will it fit my tactical vest? Most plates fit standard vest sizes. Common sizes are 10×12 inches. Check your vest’s specs. Some vests adjust for different plates. Thickness matters. This plate is slim for comfort. Test the fit before relying on it. A secure fit prevents shifting. It ensures full coverage during use.

(Tactical Vest Aluminum/Silicon Carbide Plate Hard Armor IIIA/III/IV Ceramic Personal Defense Strike Face Hard Tactical Plate)